CAT Enterprises
     
 

All orders requiring technical work will be shipped in 10-12 days.

                                                     10m Mobile Radio


Click for larger image

SS-9000
AM-FM-SSB 10 Meter Radio
(previously the VR-9000)

Download Manual

     The SS-9000 is an excellent and time-tested 10 Meter AM-SSB-FM-CW radio. Sideband is selectable Upper or Lower Sideband. Output power is 25 watts PEP and 12 Watts AM/CW. This radio is probably best compared to having similar circuitry as the Galaxy DX-88HL.

After a tune-up we typically see : Am 8W carrier and 40+W peak power. SSB PEP 30-40W


...This radio may be Discontinued by Ranger and will no longer be available , I am not sure when they will do the change... $219.50
 

 
Optional Accessories
 Tune-up and frequency conversion. (Tune-up, Alignment and expanded frequency coverage) $39
 RFX-85 Final. (perform a tune-up to radio to increase power, audio and performance and replace the bipolar transistor final with a completely new final section consisting of even higher power MOSFETs)
AM carrier 15 watts and 75+ watts peak power.
$119
 RFX-150 Final. (perform a tune-up to the radio.  Increase power, audio and performance and a completely new final section consisting of even higher power MOSFETs) AM carrier 35 watts and 125+ watts peak power. $185
Perform Receiver improvement mods.
(These mods replace key RX parts for better sensitivity and lower noise)
$28

 Turner RK-56 Noise Canceling microphone.
(wired for this radio with a 4 pin plug)
$46

 Astatic 636L Noise Canceling microphone.
(wired for this radio with a 4 pin plug)
$29

 Astatic D104-M6b Amplified microphone.
(wired for this radio with a 4 pin plug and a battery installed)
$41
 Astatic RD104-E Amplified microphone.
(wired for this radio with a 4 pin plug and a battery installed)
$43

Sound Byte link

 Install a Noise toy
(wired inside the radio with a switch or pushbutton to trigger any 18 second sound byte you want)
$65

Sound Byte link

 Install a Noise toy as a background theme music
(wired inside the radio with a switch to play any background music at very low volume so you can talk over it.)
$65
 Add a Small External Speaker
(plugs into back of the radio for improved sound)
$12
 Add a Large External Speaker
(plugs into back of the radio for improved sound)
$18

Colors

Install Nitro Knobs with dimmer control integration circuit built so it dims with the factory adjustment. 7 Knob set parts and labor.

 

$165

 

Feature

Advantage

R. B On/Off Switch Roger Beep (also known as End Of Transmission tone for those weak signal contacts)
NB/ANL On/Off Switch Selectable Noise Blanker and ANL (they work in conjunction to reduce noise in mobile operation or noisy locations)
Frequency Counter On/Off Switch Frequency Counter On/Off switch for glare reduction at night
+10 KHz switch A +10 KHz switch for ease of tuning a signal.
S/SWR Meter Built in S- Meter and SWR meter
SWR CAL and RF PWR Switch SWR Calibration. and adjustable RF Output power
A through F Band Coverage Switch Band Coverage in 6 switched steps
Fine/Coarse Switch Fine and Coarse frequency adjustment for precise tuning

 

 

 

 

The item most overlooked when ordering a custom radio is the microphone.  Your new tuned radio will NOT sound great with a stock mic on it.
 If your CB is more than a tool for work, you NEED to upgrade your microphone.  My personal favorites are the Astatic 636L and RD104E.

 

Reviews

   
954-771-8161 Warranty and Return Policy 954-771-8161

BellsCB Radio, 5051 NE 12th Avenue, Oakland Park, Florida. 33334   (954)771-8161