Experiencing issues? Visit our original site here!  www.bellscb.net

Hide Out of Stock
Connex CX-33HPMax 10 Meter Radio
Connex CX-33HPMax 10 Meter Radio - Image 2
Connex CX-33HPMax 10 Meter Radio - Image 3
Connex CX-33HPMax 10 Meter Radio - Image 4
Connex CX-33HPMax 10 Meter Radio - Image 5
Connex CX-33HPMax 10 Meter Radio - Image 6
Connex CX-33HPMax 10 Meter Radio - Image 7
Connex CX-33HPMax 10 Meter Radio - Image 8
Connex CX-33HPMax 10 Meter Radio - Image 9

Videos

.

, , ,

Connex CX-33HPMax 10 Meter Radio

More information

33HPMax AM/FM 10 Meter Radio

The Connex CX-33HPMAX is a high-performance 10-meter amateur mobile radio designed for operators who need substantial power in a classic, user-friendly chassis. It builds on the heritage of the CX-3300HP, offering a familiar layout but with a significant boost in output and updated features.

Key Features

  • High Power Output: Delivers up to 150+ watts of peak AM power (with some performance updates reaching up to 200 watts PeP), providing a strong signal presence for mobile operations.

  • Enhanced Audio Controls: Includes a built-in echo board with dual controls for adjusting delay and volume, allowing you to fine-tune your transmit audio.

  • Switchable Talkback: Features a dedicated talkback on/off switch with an additional +10KHz toggle for frequency flexibility.

  • Visibility & Aesthetics: Equipped with blue LED channel displays and blue lighting for the signal/power meter. The front panel also includes a three-position dimmer control to manage brightness during night driving.

    • Noise Reduction: Integrated Noise Blanker (NB) and Automatic Noise Limiter (ANL) circuits help minimize interference from vehicle ignition and other background electrical noise.

      Package Includes👇 

      Connex CX-33HPMAX Radio
      4-Pin Stock Microphone
      DC Power Cord
      Mounting Bracket and Hardware
      Microphone Hanger
      User Manual

Features

  • Mode: AM / FM / PA

  • Frequency Range: 28.015 to 28.585 MHz (10 Meter Band)

  • Band Selector: 6-band selector switch

  • Power Settings: Two-level RF power control (High/Low)

  • Microphone Jack: 4-pin front panel jack for easy access

  • Receiver Sensitivity: < 1.0 uV for 10 dB (S+N)/N

  • Dimensions: 9-1/4″ (D) x 7-7/8″ (W) x 2-3/8″ (H)

  • Current Draw: Approx. 7-10 Amps (Requires a solid 13.8V DC power source)

  • Watts FM /AM carrier power

  • AM peak power

  • BLUE meter light

  • BLUE Channel LEDRed/Green Transmit LED

  • Noise Blanker

  • Automatic Noise Limiter

  • PA

  • Echo Board with Two Controls

  • Talk Back “ON” switch

  • Two Power Output Levels High / Low

  • Pre-wired for FC 347 or FC-30 Frequency Counter

click to review tech spec's

Radios requiring technical services may be delayed 3 to 7 days

Optional accessories

Select all the accessories you would like added to this product, then select add to cart.

Choose from the many upgrades below BEFORE clicking add to cart

Radios requiring technical services take 7-14 business days from date of order.

$439.50

Upgrade Performance

Tune UP
Tune-up, Alignment and Frequency conversion
Perform a tune up, alignment, and expanded frequency conversion to the radio.
$39.50
Perform Receiver Improvement Modification
Perform Receiver Improvement Modification
These mods replace key RX parts for better sensitivity.
$26.00

Install amp switch

Install a switch to turn off the 150w amp.

other upgrades

8G Power Wire Upgrade To Radio
8G Power Wire Upgrade To Radio
Change factory power cord to a 8 Gauge Power Cord (10 foot) with AGU fuse and Change the DC Jack to a high amperage 2 Pin XT90E-M Quick connector. Install 10,000uF filter Cap inside.
$99.50
Install a Record/Playback Module
Install a Record/Playback Module
Wired inside the radio with two push buttons on the side to record 120 seconds and to play it back.
$77.50

Install a Noise toy

(wired inside the radio with a switch or pushbutton to trigger any 18 second sound byte you want)

Сhange The Appearance

Install Starbryte Knobs & Rings

Install Star-Bryte Knobs with dimmer control circuit integrated into the radios dimmer. Includes a 6 Knob set, parts and labor. (The picture will show a BLUE color but we will install the color you choose. It is just for an example.)

Install Starbryte Rings ONLY

Install Starbryte Rings ONLY (NO KNOBS) behind the factory knobs with dimmer control circuit integrated into the radios dimmer. Includes 6 LED Rings ONLY, parts and labor. (The picture will show a BLUE color but we will install the color you choose. It is just for an example.)

Additional Accessories

Side Brackets K-615
Side Brackets K-615
Add a table top stand to run this as a *Base Station* in the house. (Brackets ONLY, RADIO NOT Included)
$24.99
Base Station Stand K-621
Base Station Stand K-621
Add a power supply, speaker, and fan to run this as a *Base Station* in the house.
$159.99
PSV-300
PSV-300
to run this as a Base Station in the house.
$109.50

Upgrade Microphone

RK-56B Microphone
Turner RK-56B Noise Canceling microphone
Pre-wired with high quality 4 pin Plug for Cobra / Uniden / President / Galaxy / Radio Shack / Ranger
$46.50
Astatic 636L Noise Canceling microphone
Astatic 636L Noise Canceling microphone
$34.50

Upgrade speaker

Add a Small External Speaker
Add a Small External Speaker
(plugs into back of the radio for improved sound)
$12.00
Add a Large External Speaker
Add a Large External Speaker
(plugs into back of the radio for improved sound)
$25.00
Order total:

Recommended For You

Related products

Popup code

Scroll to Top

RA Form

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
If you don't know, please leave blank.