|
The DLS-75 provides AC/DC conversion up to 75 amps and features a
Dual Voltage Jack, allowing the user to manually select between 13.6V
and 14.2V charging.
DLS-75
75 AMP POWER
SUPPLY/CHARGER |
|
|
INPUT
VOLTAGE
108-132 VAC
INPUT
FREQUENCY
50-60 Hz
OUTPUT
VOLTAGE
13.4 VDC
OUTPUT
AMPERAGE
75 Amps
|
|
|
DESCRIPTION |
The DLS-75
Power Converter/Battery Charger from IOTA Engineering converts
nominal 108-132 AC voltage to 13.4 DC voltage for both DC load
operation and 12V battery charging.
As a power supply, the unit's tightly controlled
regulation allows the user to operate a nominal 12VDC load up to
75 amps.
As a battery charger, the unit will maintain the battery,
delivering its full-rated current when the battery capacity
falls sufficiently low. The voltage is set to deliver its
maximum current for the necessary period of time to minimize
undue stress to the battery caused by heating of its cells. This
helps to ensure the longest possible life of the battery. Over
time, as the battery nears its full capacity, the DLS-75
can be switched to drop the current, providing a float-charge to
the battery to prevent self-discharge of the cells.
MOUNTING DIAGRAM
You can connect two in parallel
to double the amperage.
2 x 75A = 150A
Some things to keep in
mind:
- There is no
"on/off" switch. The unit is on all the time when plugged
in.
- The power cord
although thick and heavy duty is a bit short. They want you
to plug it in close to the wall jack because it draws a lot
of current under full load.
- The power
cord has a plug designed for 20A outlets. One prong is
horizontal and one is vertical. Some people have only 15A
outlets and this unit needs more than that to put out 75A of
DC.
|
|
Chat
Download Manual
