Download Manual

     Download Software

Optional Accessories
	Tune-up and frequency conversion. (Tune-up, Alignment and expanded frequency)	$49
Switch Location None $49 Back $59 Side $69	Install an EXTERNAL PTT keying port. We use an RCA jack for a TX output PORT to your external device. Every time you key it provides a connection between the +/- of the RCA connector.    1) Output RCA completely isolated  from the radio. Both +/-  connect to a relay that isolates it from the radios circuits.    2) Optional BYPASS switch in case your external device does not have a standby (turns port off (stays open))      4) Heavy duty relay can handle any keying circuit voltage, even the SB-220's - 120VDC circuit.	$49 / $59 / $69
	Change factory power cord to a 10 Gauge Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 10,000uF Capacitor is also added for additional DC filtering.	$59
	Change factory power cord to a 8 Gauge Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 10,000uF Capacitor is also added for additional DC filtering.	$99
	Install a Record/Playback Module 120 seconds (wired inside the radio with a switch on the side to record 120 seconds and to play it back over the air)	$77
Sound Byte link SOLD OUT	Install a Noise toy (wired inside the radio with a switch or pushbutton to trigger any 30 second sound byte you want)	$65
Sound Byte link SOLD OUT	Install a Noise toy as a background theme music (wired inside the radio with a switch to play any background music at very low volume so you can talk over it.)	$65
	Programming Cable For Software programming via computer. We don't know anything about programming these units and we can provide no assistance with it.	$18
	Add a Small External Speaker (plugs into back of the radio for improved sound)	$12
	Add a Large External Speaker (plugs into back of the radio for improved sound)	$25