|
Optional
Accessories |
|
Select Above |
Tune-up and frequency
conversion.
(Tune-up, Alignment and
expanded frequency coverage)
High Power carrier is 8w, 2w low power carrier. |
$39 |
|
|
RFX-95HD
Final.
Final.
Install a completely new final
section consisting of a high power MOSFET and perform a
tune-up to the entire radio to increase power, audio and performance
with an AM carrier
of 20 watts with 80+ watts peak power.
Amp
on/off switch in
installed in place of the NB
switch. (Switch can
also be in the back if requested.) |
$189 |
|
|
Change
factory power cord
to a 10 Gauge
Power Cord (14 foot) and modify the DC Jack for high amperage 2 Pin Quick connector. A 3300uF Capacitor is also added for additional DC filtering. This is only helpful when
you have the RFX-95HD2 and is NOT required for a stock radio
    |
$59 |
|
|
FAN KIT Installed Install TWO- 40 x 40 x 20mm Black Fans with a switch for on/off combined with the amp on/off switch.I
use also a relay isolated low noise power input system. |
$79 |
|
|
Perform
Receiver improvement mod.
(These mods
replace key RX parts for better sensitivity and selectivity) |
$26 |
 |
Turner
RK-56
Noise Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$46 |
 |
Astatic
636L Noise
Canceling microphone.
(wired for this radio with
a 4 pin plug) |
$29 |
 |
Astatic
RD104-E Amplified microphone.
(wired for this radio with a 4
pin plug and a battery installed) |
$46 |
|
|
Install a
Record/Playback Module 120 seconds
(wired inside the radio with a
switch on the side to record 120 seconds and to play it back
over the air) |
$77 |
|
|
Install a
Roger Beep Module
(wired inside the radio using
the DIM switch for on/off) |
$79 |
|
|
Install
a
Noise toy
(wired inside the radio with
a switch or pushbutton to trigger any 30 second sound byte
you want) |
$65 |
|
|
Install
a
Noise toy as a background theme music
(wired inside the radio with
a switch to play any background music at very low volume so
you can talk over it.) |
$65 |
 |
Add
a
Small External Speaker
(plugs into back of the
radio for improved sound) |
$12 |
 |
Add a
Large External Speaker
(plugs into back of the radio
for improved sound) |
$25 |
|
|
 Install
Star-Bryte Knobs with dimmer control
circuit integrated into the radios dimmer. Includes a 6
Knob set , parts and labor. |
$202 |
|
|
 Install
Star-Bryte Rings behind the factory
knobs with dimmer control
circuit integrated into the radios dimmer. Includes a 6
LED Rings , parts and labor. |
$154 |
 |
Exchange
the top and bottom
covers
to
Chrome Covers. |
$32 |
 |
Exchange
the top and bottom
covers
to
Diamond Plate
Covers. |
$22 |
Chat
