assembly diagram

Firestik® "World's Best" Stud Mounts


      Perfect for use with FireRing coax

Firestik stud mounts have become the standard of our industry. This wasn't by accident. It was because users learned to appreciate their outstanding design and material quality. Instead of inexpensive aluminum, they use chrome plated machine brass. Instead of 9/16" (14mm) hex-stock, they use 5/8" (16mm) stock. Instead of ABS or inferior plastic insulators, they use nylon. Instead of cadmium plated hardware, they use stainless steel. Furthermore, our heavy-duty 3/8" center shanks can mean the difference between trouble free use and lost antennas. Also may be used with any 3/8"-24 threaded accessories.

The design of the FireRing coax termination requires the 1.25" mounting bolt that is found in the K-4R stud mount.

Assembly of a FireRing terminated coaxial cable with the K-4R


...Antenna Stud Mount... $5.99
"The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feed line. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end up with unneeded loss. And if that isn't enough, the stud mount must be strong enough to withstand all of the stress placed upon it from an antenna that is subject to severe wind load and vibration."

Limited 1 Year Warranty











If you place an order from outside the continental USA, we will calculate your actual shipping and send you a PayPal payment request.  We do NOT export Antennas or Base station radios.


954-771-8161 Our Warranty and Return Policy 954-771-8161  


BellsCB Radio, 5051 NE 12th Avenue, Oakland Park, Florida. 33334   (954)771-8161