-ANL Switch
-Compact Size
-Full 40 Channel Operation
-S/RF Meter
-MOSFET Final Transistor.
-Requires a High impedance electret microphone or amplified microphone. These do not work well with the noise cancelling mics like the 636L or the RK-56

ANL Switch – You can select the Automatic Noise Limiter to help
reduce harsh background noise caused by a variety of interference sources.

– TX LED – An LED lights to indicate when the radio is transmitting.

– S/RF Meter – This LED meter shows the relative strength of the received signal or the RF output.

– Channel Indicator – Displays the channel currently in use.

– Channel Selector – This switch selects the desired channel for transmission and reception.

– Squelch – The squelch control is used to eliminate background noise during the absence of a transmission.

– Volume Control – Rotate clockwise to turn the radio on and to increase the volume.

– Microphone Jack – The operational mode of the CB is controlled by the push-to-talk switch on the microphone.

-Antenna Connector – This female connector permits connection of the transmission line cable male connector (PL-259) to the transceiver.

-EXT SP Jack – An External 8 Ohm 7-Watt Speaker may be connected to this jack. The internal speaker is disabled when you plug into this jack.