Galaxy CB radios are designed with features that a serious CB operator can appreciate and a new user can easily master.
The radio functions are laid out in a driver friendly format essential for ease of use while keeping your eyes focused on the road ahead.
Each knob or button controls its own task, minimizing the need to look at a display or cycle through multiple menus.
The DX-959 has been a solid performer for more than 15 years.
It is at the top of our mobile CB line and is jam packed with big radio features.
The Galaxy DX-959B features AM/SSB and PA Modes, a Large, Easy-to-Read Meter with: Power Output Scale calibrated for AM and SSB, Modulation Percentage Scale for use on AM, Signal Strength Scale indicates up to 60 dB over S9 and an SWR Scale.
Five-digit Frequency Counter with On/Off Switch, Automatic SWR Circuit (no complicated calibration procedure), High SWR Alert Circuit with Warning LED, Talkback Circuit with On/Off Switch and Volume Control, Variable Power Output Control, Variable Dimmer Control with On/Off Switch, Roger Beep with On/Off Switch and an LED Indicator, Noise Blanker and Automatic Noise Limiter Circuits.
Also, it has the Galaxy Noise Filter (GNF) Circuit for use on weak SSB signals.
Blue Meter Lamp, Blue Channel and Frequency LEDs. Full-sized Chassis, Side Mic Jack, Clarifier Control, 3-Position Tone Control Switch for Receive, Blue/Red LED Indicator for RX/TX, RF Gain Control, Mic Gain Control, Rear Jacks for External Speaker and Public Address Use.
Two Year Limited Warranty.
Dimensions:7-7/8″W x 9-1/4″D x 2-5/16″H (Depth does not include knobs or antenna connector) (Width does not include side mic connection) Radio
Weight with Microphone: 4.4 pounds Shipping Weight: 5.8 pounds.
What’s in the box beside the radio: Handheld Microphone, Radio Mounting Bracket and Microphone Mounting Hardware, Power Cord, Owner’s Manual

From Galaxy: 👇
“Today, I am happy to announce that our Research & Development Team has come
up with a Deluxe Edition of the DX959 – the DX959B. It is exactly the same
in circuitry, components and operation as the DX959. However, they have
changed the frequency LEDs, channel LEDs, RB LED and RX LED from green to
blue. In addition, they added a “StarLite” faceplate with all lettering
backlit in either blue or red. This does not replace the current DX959. The
old DX959 stays. We now have two versions of the 959.”

**Please note, the StarLite lettering is always at full brightness because it
is not very intense – even in the dark. It is designed to let you know where
the controls are, but not be too bright. The back lighting may be turned off
using the Display Push switch but the brightness level is not affected by
the Dimmer pot. The StarLite lettering is always at full brightness when it
is on. The blue digits of the frequency display and channel display can go from
very bright to very dim using our high resolution dimmer circuit. The Dimmer
control pot on the DX959B starts dimming almost immediately when you start
turning it down from maximum. On some radios, the dimming effect is not even
noticeable until you turn the pot a quarter or half turn. This one starts
dimming immediately and dims continuously down to where you can barely
notice the digits are on. This is perfect for night driving. You make the
digits exactly as bright as you like them. Of course, the digits can be shut
off completely with the Display Push switch.**