Hide Out of Stock

Videos

General HP40W AM/FM 10 Meter Mobile Radio

More information

Features

-(4) IRF-520 MOSFET final section.
-Dual Stage Echo Control
-6-Band Frequency
-Meter Scales for Signal, Power Output
-Red/Green – Transmit/Receive LED
-Blue Channel LED’s and Meter Light
-Dimmer switch for high and low LED channel
-and meter light brightness.
-Talk Back switch for separately controlled TB
-on and off.
-Three position switch for Noise Blanker (NB)/
-Automatic Noise Limiter (ANL)
-Mic Gain
-RF Gain (receive gain)
-AM/FM/PA
-PA includes Echo
-40 watts – AM carrier (30W after a tune up)
-100W watts PEAK POWER (AM) (120+ watts
after a tune up)
-H/L Output Power switch (low power usually set
to 3W)
-Dimensions:
-Shipping weight — 13 pounds
-Shipped UPS with $300 insurance and Signature
required. (The shipping cost to most locations is
between $18 and $29)

General radios sometimes have a small scratch or ding that the factory covers with black touch up. We cannot effect this and do not guarantee your radio to be cosmetically perfect. Bells CB will make no marks or scratches on your radio ourselves. General radio might though and I cannot control it.

Radios requiring technical services may be delayed 3 to 7 days

Optional accessories

Select all the accessories you would like added to this product, then select add to cart.

Choose from the many upgrades below BEFORE clicking add to cart

Radios requiring technical services may be delayed 3 to 7 days

$389.50

Upgrade Performance

Tune-up and frequency conversion
(Tune-up, Alignment and expanded frequency coverage)
$39.00

upgrade performance

Perform Receiver improvement mods.
(These mods replace key RX parts for better sensitivity and selectivity)
$26.00
Install a variable power knob in the back of the radio.
. Wired to make LOW power variable This is for people running larger amplifiers and are not sure exactly what amount of drive is perfect.
$49.00

upgrade Microphone

Turner RK-56 Noise Canceling microphone
(wired for this radio with a 4 pin plug)
(+$46.00)
636L Noise Canceling Microphone
(wired for this radio with a 4 pin plug)
(+$29.00)

Upgrade speaker

Add a Small External Speaker
(plugs into back of the radio for improved sound)
(+$12.00)
Add a Large External Speaker
(plugs into back of the radio for improved sound)
(+$25.00)

Upgrade Performance

Tune-up and frequency conversion
(Tune-up, Alignment and expanded frequency coverage)
$39.00

Add a power Supply

PSV-300
to run this as a Base Station in the house.
$109.50

Сhange The Appearance

Install Star-Bryte Knobs

with dimmer control integration circuit built so it dims with the factory adjustment. 8 Knob set parts and labor.

Other upgrades

Install a Roger Beep Module
(wired inside the radio using the CH9 switch for on/off)
$79.00
Install a Record/Playback Module
18 seconds. Wired inside the radio with two pushbuttons on the side to record 18 seconds and to play it back.
$77.00

Install a Noise toy as a background theme music

Wired inside the radio with a switch to play any background music at very low volume so you can talk over it.

Install a Noise toy

Wired inside the radio with a switch or pushbutton to trigger any 18 second sound byte you want.

Tune-up and frequency conversion.

(Tune-up, Alignment and expanded frequency coverage) High Power carrier is 25w, select low power carrier desired.

Install a switch to turn off the 100w amp.

Wired to a switch in the front, side or back of radio.

Order total:

Optional Accessories

Recommended For You

Popup code

Scroll to Top

RA Form

"*" indicates required fields

Description