Lighted Radio Knob kit for your CB radio with triple LED illumination. Star Bryte made by Stryker Radio. The knob is clear with colored LED lights. Glows the LED through the clear knob.

The installation is rather difficult and very time consuming.

On some radios that have illumination already, like the Stryker SR-497, all you have to do is change the knobs, no rings required.
Tech Tips: I usually use about a 100 ohm resister in series with the red wire. I run the black (-) wire through a switch and I use and an additional 200 Ohms for medium and 1000 ohms for very dim (night time). Resistance values changed to your liking, the larger the value the dimmer the light.
Make sure to specify your radio model exactly and how many of each type of knob you have. (you can tell us in the comments block when you check out)
Tech note: Do you need the metal clips for inside the knobs? Stryker expects you to use the clips from your old knobs, if you don’t have the old knobs or if your old knobs didn’t use metal clips, you can buy them HERE.