The Most Trusted Name in CB Radios. It’s tough and powerful with a large
easy-to-read display and exciting new features including 7 Color Backlighting,
Noise Cancelling Mic, and Wireless Mic Compatibility.

View of the front:

1. Volume Control knob with Power On/Off.
2. SQUELCH knob:
3. S/RF/CAL/SWR Meter:
4. Channel Number display.
5. Operation buttons and associated LEDs:

Talkback: Talkback lets you monitor yourself when transmitting.
With Talkback active, press PTT and adjust the volume with the Volume Control
knob. (Levels 00 – 15)
MIC Gain: Adjusts microphone sensitivity. Delivers up to 100%
modulation. With MIC Gain active, press PTT and adjust the gain
levels with the Volume Control knob. (Levels 00 – 04)
Weather: Press to toggle between Weather and CB channels. Turn
Channel Selector to cycle through the 7 weather channels.
Press and hold to turn Weather Alert on and off. ALERT displays.
Day/Night: Adjusts LCD backlight sensitivity between Day and
Night modes.

6. Channel Selector/MENU/OK. Press the inner MENU/OK button to
select a menu option or other selection. Turn the outer Channel
Selector knob to:

Select channels
Select menu modes
Change scan resume direction (up or down)
Control Talkback volume
Control Mic gain level
Control Calibration volume

7. Microphone socket.
8. Indicators turn on when the function is turned on.
9. S/RF/CAL/SWR: Push to to check RF signal strength, calibration,
and SWR reading.
10. CB/PA: Selects CB (Citizens Band) or PA (Public Address).
Do not use the PA function unless an external speaker is connected.
11. MEM/SCAN: Press to start or stop scanning modes [All Channel
Scan (see page 10) and Memory Scan (see page 12)]. Press and hold
to set or clear channel memory while in Memory mode.
12. 9/19/NORM: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
13. Frequency Display: Displays the MHz of the selected channel. Also
displays menu options.
14. ANL: Turns ANL (Automatic Noise Limiter) feature on and off.
ANL reduces external noise.
15. NB: Turns NB (Noise Blanker) feature on and off. NB reduces
interference from vehicle ignition systems.
16. RF Gain knob: Improves reception in strong signal areas.

View of the back:

17. Antenna socket: Connects antenna to the unit.
18. PA SP: Connects optional external 8-ohm, 4-watt speaker for use
as a public address system.
To prevent acoustic feedback, separate the microphone from the speaker when
operating the PA at high output levels.
19. EXT. SP: Connects an 8-ohm 4-watt speaker to remotely monitor
the receiver.
When the external speaker is plugged in, the internal speaker is off.
20. POWER: Connects DC power to transceiver.
21. Fuse.
22. PTT: Push-to-Talk.