All the equipment on this page is Certified as WORKING
condition unless
otherwise clearly marked/stated.
Product
Description
Price
Ranger RCI-2970N2 -- Like
NEW condition -- All acessories in the box
$449
The Radio Wavz B19TX is
a 1:9 transformer balun. 1500W PEP SSB 200W CW 1.8 to
50MHz 2 dipole end insulators have been thrown in as well.
$30
The Radio Wavz B14VA is
a 1:4 voltage air core balun. 1500W PEP SSB 200W CW
1.8 to 50MHz
2 dipole end insulators have been thrown
in as well.
$30
The Heathkit HA-202Ais a 2-meter FM amplifier for
ham radio. It can boost mobile output to 40 watts while only
using 7 amps from a car's 12-volt battery. I tested it
at 5W in and got 25W output Also for Sale in our
eBay
store
$30
Yaesu G-450A antenna
rotator
The Yaesu G-450A is a light to
medium duty antenna rotator that is designed for small HF
beams, tri-banders, or VHF and UHF antennas. It has a 450
degree azimuth rotation range and can handle a wind load of up
to 10 sq ft. The G-450A is easy to install and has a nice
build quality. It also performs well in all types of weather
$200
Ranger RCI-69FFB4
- Like New condition
- 425 Watts - 4x
2SC-2879's
The Anytone AT-D878UV is a dual
band DMR transceiver that operates on both the UHF and VHF
frequency bands. It has a 1.77 inch color TFT screen with a
selectable dual channel or single channel display.
$165
Henry 2K-4 HF linear Amplifier
Alpha 3-500ZG Tubes NIB
(New In Box)
Local Pickup Only
If you prefer your own tubes,
we would be happy to keep the tubes and take $2000.
Local Pick-up ONLY.
$2500
Astatic D104 with G Stand
NON-Amplified D104
Perfect for old radios like
Tram or Browning that have the amplifier built into the
radio. Also for Sale in oureBaystore.
$60
ICOM IC-271A 2M VHF all mode transceiver
Frequency range of 143.8-148.2
MHz
2 meter all-mode
transceiver from the 1980s that does not support AM.
The IC-271A was built with
state-of-the-art construction. It is no longer in production.
$290
DRAKE MS-4 Speaker The Drake MS-4
is an external speaker with a 5 x 7 inch speaker and a black,
all-metal cabinet. It was introduced in 1965 to match the
Drake 4 line of receivers and transceivers. The MS-4 is 11 x
6.25 x 11.6 inches and is designed to provide clear, rich
sound.
$95
The
Yaesu Landliner #1is a phone patch and speaker for the FT-101B
transceiver. The Yaesu Landliner is also known as the Yaesu
SP-101PB. The Yaesu Landliner also designed to be used with
the YAESU FT-301 Series Transistorized Single Sideband
Transceiver.
$50
The
Yaesu Landliner #2 is a phone patch and speaker for the FT-101B
transceiver. The Yaesu Landliner is also known as the Yaesu
SP-101PB. The Yaesu Landliner also designed to be used with
the YAESU FT-301 Series Transistorized Single Sideband Transceiver.
$50
The
Yaesu Landliner #3 is a phone patch and speaker for the FT-101B
transceiver. The Yaesu Landliner is also known as the Yaesu
SP-101PB. The Yaesu Landliner also designed to be used with
the YAESU FT-301 Series Transistorized Single Sideband
Transceiver.
$50
The
Yaesu YC-601B is an external digital frequency display for the
FT-101/277 and FT-401/501 series. It displays MHz,
kHz, and 100 Hz using six red digital displays.
The Siltronix model 90
Type#7is an external VFO (variable frequency
oscillator) for ham radios. The Siltronix model 90 was
designed to replace a crystal in a 23-channel solid-state CB
transceiver.
The
Kenwood TM-3530A is a 220 MHz FM transceiver made by Kenwood
in the mid to late 1980s. It is similar to the TM-2530A, but
transmits 25 or 5 watts on 220 MHz instead of 2 meters.
The frequency range is 220-225 MHz for TX and RX.
We checked the eBay sale prices on these and it is around
50-75 but hat was for "Parts Only" and we are selling a
working radio so we figure it must be worth this.
$95
ART TUBE MP #1 The ART Tube MP is an external
tube microphone preamp. It's a professional audio interface
that lets you connect microphones, instruments, and line level
signals to a mixer or other audio input. The Tube MP is
designed to provide professional recording studio results at a
fraction of the cost of comparable equipment.
Manual
$30
ART TUBE MP #2 The ART Tube MP is an external
tube microphone preamp. It's a professional audio interface
that lets you connect microphones, instruments, and line level
signals to a mixer or other audio input. The Tube MP is
designed to provide professional recording studio results at a
fraction of the cost of comparable equipment.
Manual
$30
The Original Swan MM8X RF Impedance Matching Device
$25
Local Pick-up ONLY.
The
Kenwood TL-922A is
an HF linear amplifier designed to provide the maximum legal
power. It uses two 3-500Z high performance
transmitting tubes and has two meters for operating
convenience. The amplifier has a power of 2000W
PEP SSB and 1000W DC CW/RTTY. It also has a drive
power of only 80 (or more) watts.
Some say the Kenwood TL-922A runs cool and quiet, and easily
puts out 1200 Watts plus on all bands. It is also compact and
beautifully built and designed. Local Pick-up ONLY.
$1500
The
Yaesu SP-107P
is an external speaker and phone patch that is designed to
work with the FT-107 series of HF SSB transceivers. Although
the SP-107P is intended for use with the
FT-107M transceiver the former user liked to use it as a
input and output audio buffer for his external rack gear on
many radios.
Ameritron RCS-4 Remote Coax Switch The Ameritron RCS-4 is a remote
controlled coax switch that selects one of four outputs by
supplying all control voltages through the coax. The
elimination of control cables gives you a fast, neat and
inexpensive installation w with only one coaxial line for four
antennas. You get
two units -- the switching box that can be tower, mast or wall
mounted and the control console that is located at your
operating station. The attractive indoor console has bright
LED antenna selector indicators. A steel enclosure provides
100% shielding to prevent RFI and TVI. Switching time is 50ms.
SO-239 connectors provide reliable connections. The
weatherproof switching box uses three heavy duty 10 ampere
contact relays on a rugged G-10 fiberglass circuit board.
Quality components are used throughout the entire unit to
ensure maximum life for the sometimes difficult-to-reach
switching box.
Product Manual
$195
The Diamond MX-62Mis a duplexer that is suitable for transceivers with separate
in/out for HF + 6 m. and VHF/UHF. It has a power capacity
of 600W PEP and an impedance of 50 Ohms. The input is an
SO-239 socket and the two outputs are PL-259 plugs attached to
the duplexer by 200mm of cable
Also for Sale in our
eBay store
$50
The SuperSCAF From
AFtronics
A SCAF is a "
Switched-Capacitor Audio Filter. The SuperSCAF contains none
of the components usually found in audio filters . There are
no coils, op amps. or precision-matched components . The
SuperSCAF has an over 150dB/octave rolloff. It also has
a 5O-Hz-wide filter to effectively cope with a busy CW band
or pileup
The MFJ Deluxe Versa
Tuner II MFJ-969 is a 300 watt PEP SSB full
featured roller
inductor antenna tuner. It has a full size
lighted cross-needle SWR/Wattmeter that reads true peak
forward power, QRM-Free PreTune, 8 position antenna switch,
built in 50 ohm dummy load, heavy duty 4:1 balun, and an
attractive cabinet. It can be powered by an external 12V power
or an internal 9V battery. Also for Sale in oureBay
store
$195
Audio Capture FA-66 FireWire The Edirol FA-66 is a
compact, portable audio interface that offers 192kHz/24-bit
audio. It is designed for mobile recording and performance
professionals. The FA-66 has dual XLR/TRS inputs with phantom
power, and input two has a Hi-Z option for guitar or bass. It
also has stereo RCA inputs at the rear. The FA-66 is easy to
use and has quiet preamps. Also for Sale in our
eBay store
$40
The Ramsey CT-250
Counter.
-- Fast / Med / Slow Gate
speeds -- 10 Mhz, 60Mhz and 2.5GHz Modes -- Hold
Function Also for Sale in our
eBay store
$50
Vectronics VC-300M
Mobile Antenna Tuner. The Vectronics VC-300M is a 300W HF
mobile antenna tuner. It's compact, lightweight, and easy to
operate. It's compatible with any mobile antenna. The VC-300M
has the following features: Power ranges: 30 and 300 watts
Input and output jacks: Both SO-239 Frequency compensated
lighted dual movement SWR/Power meter: Can show either peak or
average readings Continuous rotation capacitors: And a 48 turn
switched rotary inductor Adjustable impedance matching:
Optimizes the performance of your antenna and transmitter,
receiver, or transceiver The VC-300M can be used at home with
dipoles, vees, verticals, beams, or quads fed by coax
$80
The CDR Rotor
Controller Model HAM 115is an antenna controller. manual.PDF
HL-100BDX - Tokyo HF/6m Linear Amplifier
* Frequency: 3.5- 29.7MHz + 50MHz
* Mode: SSB/CW, FM/AM
* RF Drive: 5W (1 - 5W),
10W (1 - 10W) selectable
* RF Output: 100W PEP (25W AM)
* Type: MOSFET RD70HVF1
* LED Power Level Meter
* Separate Band LEDs
* ALC output
* Power: 13.8V 14A max
* Connectors: SO-239
* Size: 174 x 56 x 235mm
* Weight: 2.4kg A compact solid-state linear to boost 5 - 10W
transceiver to 100W output. Ideal for mobile operation in
combination with HF /6m transceiver such asYaesu
FT-817. Initial testing on this unit
shows High Input SWR and safety warning. error code = VOLT?
Hy-Gain T2X
Tailtwister Series II Rotator and Controller Rotator and Controller, 20 Sq. Ft. Wind Load, 1,000 in-lbs. Turning,
2.063 in
Max. Mast Diameter This is for the BIG Beams !!! NON-WORKING
UNIT I suggest Norms Rotor Service
to have this fully repaired, they will make it look and
operate like new.
Buy this unit, have
me ship it to Norm's with your information (contact them
first)and you get a $1200 dollar
rotor system for about Half and it's guaranteed to work better than
new.
$475
NON-WORKING
UNIT
The Ten-Tec Titan 425
is an
all-mode linear amplifier with a frequency range of 10-160 m.
It uses two
Eimac 3CX800A7 ceramic triodes,each of which is capable of
1.2 kW carrier.
The Titan 425 can easily put out the legal limit of 1500
watts. (and more) It consists of two units: an
amplifier and a power supply. The amplifier uses a grounded
grid configuration and a ducted forced air cooling system.
The Titan 425 covers all ham
bands from 160 meter to 10 meter. It is simple to tune,
especially if you write down the settings for every band. Initial testing on this unit
shows no Turn on in the amp. Price set for a NON working unit.
NON-WORKING
UNIT If time permits I will
fix this unit (probably minor), then I will change the price
to $1500-1800 If you or your tech wants a
deal, buy it
NOW
AS-IS.
$1000
The FlexRadio
SDR-1000 is a
software-defined radio (SDR) transceiver that was introduced
in 2003. FlexRadio was the first to introduce an SDR
transceiver to the amateur community. The SDR-1000 has a
straightforward design and available schematics. The
SDR-1000's functionality and performance can be upgraded
through simple software downloads. I Do NOT want to spend 2
days getting this set up to test it out. It just is NOT something I can test in 20-30 minutes.
Buyer takes it AS IS, It may work or may not, I don't know.
$75
NON working
meter. Your going to use an external
meter anyway right?
The MFJ-981 Versa
Tuner IVis an antenna tuner
that can match any feedline from 1.8 to 30 MHz. It has a
capacity of up to 3 KW. The MFJ-981 covers the MARS and WARC
bands. It can match any feedline, including: Coax,
Balanced line, Random wire. Tuner functions well but meter
circuit burnt out. Priced at 50% value due to meter.
(see photo area circled in
blue) Also for Sale in our
eBay store
$75
The Kenwood TS-940S
is an
all-solid state HF transceiver. It has an optional built-in
automatic antenna tuner (AT). The TS-940S has the following
features: -- 100 Watts power output -- 150 kHz to 30
MHz general coverage receiver -- Interference reduction
circuits -- High dynamic range receiver -- Antenna
impedance / connector: 50 ohm (20-150 ohm with AT-940) /
SO-239 -- Modulations: AM FM CW SSB FSK -- Instruction
manual and schematics included as shown in photo.
NON working
unit. NO TX and NO
RX
$140
The Yaesu FT-620B
is a
solid-state, multi-mode 6 meter transceiver. It has the
following features: -- Modes include AM, CW, LSB, and USB
-- Output power is 20 watts SSB PEP, 20 watts CW --
Frequency range is 6 m in 8 bands -- frequency range of
50.0-50.5 MHz and 50.5-51.0 MHz. NON working
unit. NO TX and NO
RX Also for Sale in our
eBay
store
$115
The Icom IC-730 is a compact, amateur HF radio
that covers 80 through 10 meters. Frequency range: 10-80 m
+ WARC 3.5-4.0 MHz 7.0-7.3 MHz 10.0-10.5 MHz (RX only) Includes
the
matching Power supply IC-PS15 -- Receives Great --
NO Transmit
$225
Model H-III /
CD-44 is a
rotor control box that's part of the CDE Ham III Series 2
Rotor System. The CD-44, HAM-2, and HAM-3 rotors share the
same controller SOLD AS PARTS UNIT MAY or
MAY NOT WORK. UNTESTED Also for Sale in our
eBay store
$35
The
Model H-III /
CD-44 is a
rotor control box that's part of the CDE Ham III Series 2
Rotor System. The CD-44, HAM-2, and HAM-3 rotors share the
same controller
The Ameritron RCS-8Vis a remote controlled coaxial
RF switch.THIS IS
ONLY HALF OF THIS UNIT. This is the control
unit that is placed at your operating station. If you have
this system and need a new control head.
The Yaesu YO-100 is a
station monitor
scope allows you to monitor and adjust your transmitter
for the cleanest signal possible. The YO-100 is designed to
work with most transceivers for monitoring transmit signals
from 1.8 to 60 MHz. It consists of a monitor of "On the air"
signal and an oscilloscope.
NON-WORKING
UNIT
Looks like on eBay a working
unit is worth $200 and a Parts unit is getting as much as
$150.