CAT Enterprises
   
 

 Orders requiring technical work are shipped in about 7-14 days.

Jeep Mount Installation

 

 
Drilling Mount Holes Installed Mount Complete Install
 

Note: The rearward part of the fender on newer Jeeps does not have the same support that was found in earlier models. On these vehicles we recommend that the bracket be mounted at least 8-inches (20cm) forward of the rear edge of the fender where it has sufficient support. If this is not followed, or if the rear part of the fender is not given additional support, the fender, dependent upon the antenna size, will flex from any whipping action of the antenna. See the following for guidance.

 

Courtesy of:

Firestik Antenna Company
2614 East Adams St.
Phoenix, AZ 85034

 

 

The item most overlooked when ordering a custom radio is the microphone.  Your new tuned radio will NOT
sound great  with a stock mic on it  If your CB is more than a tool for work, you NEED to upgrade your microphone. 
My personal favorites are the Astatic 636L and RD104E.

If you place an order from outside the continental USA, we will calculate your actual shipping and send you a PayPal payment request.  We do NOT export Antennas or Base station radios.

 

954-771-8161 Our Warranty and Return Policy   954-771-8161

 
     

BellsCB Radio, 5051 NE 12th Avenue, Oakland Park, Florida. 33334   (954)771-8161